Adjustable base photo: LINK
First off, this is my first post here. So glad I found this website!
I recently bought a costco adjustable base, it’s the sleep science q series one:
LINK
I just bought a Naturepedic EOS Classic and haven’t put it together yet. I’m wondering if this type of adjustable base construction, which appears to have a metal grid with some kind of fabric webbing on it, will be an issue with this mattress. It doesn’t seem like a flat uniform surface, the guy at the mattress store where I bought the mattress said this style of base is fine, but I’d imagine that it would put very uneven support under the support layer - is this a problem?
It was a very expensive mattress, I don’t want to put it on anything that could damage it or cause it not to perform as well as it would otherwise.
Thanks!
2 Likes
Hi sburck11,
Welcome to the Mattress UnderGround.
Yes the adjustable base you select will affect the feel of the mattress and can also present some problems.
If the grid spacing is too wide or if the edges are not properly padded or covered, there’s a risk of the mattress sinking into the gaps or getting damaged along the edges.
With a naturepedic eos, the option for something like this base. The costco base is closer to 600 in a queen vs the 900 for the yawnder, but in the long run the 300 may be worth the investment as it is a solid wood deck with a cover to protect the mattress surface.
Having experienced the yawnder4 adjustable base in the queen size, it was extremely easy to set up. You do need two people, as it is heavy to move around. It comes in a box where you simply unfold the base, screw the segmented legs (which are 3" for each segment) to the base, connect the electrical plug while upside down. Then you simply flip over, place inside your bedframe, or stand alone, plug in to the wall and done.
Hope this helps,
Maverick
1 Like
What did you learn? Same question here. Recommendations for base under latex mattress are usually slats no more than 3" apart. Like you, I am concerned that a web/canvas between widely spaced “slats” in the Costco adjustable Sleep Science might lead to slumping hills in the mattress.
1 Like
Your concern is valid. The proper guideline to follow for any foam mattress is a spacing of under 3 inches. Regardless if the manufacturer suggests wider spacing. The reality of it is, why take that chance.
Why take the chance? I’m looking for a comfortable read-in-bed option…without sacrificing sleep quality. Is it out there?
1 Like
Hmmm there seems to be a miscommunication of thoughts. My “why take the chance” comment was targeted to using a foundation that has more than 3" of spacing.
When looking for a comfortable read in bed option without sacrificing sleep quality, I would suggest an adjustable base, that has a solid deck, like a yawnder4 base (which is an ergomotion private labeled RIO 4.) Having the option to raise your back while reading in bed is likely the most comfortable option. Another option, one that my wife uses, is to stack 3 or 4 pillows behind her back while reading her Fire in bed. Still, if you are using a stationary slatted base, keep it under 3" for any type of foam or hybrid mattress.
Sorry I wasn’t clear. It’s a new language for me.
Two communications = One thought + One question.
- Flat Stationary Base needs Slats <= 3" apart. There appears to be consensus here.
- Adjustable Base. These have canvas-fabric with underlying metal slats that are wide apart. I am wondering: Do these widely separated metal slats with canvas over them adequately support a Latex mattress? Or is there sagging or threat to the integrity or comfort of the mattress?
Yes it can compromise certain foam or hybrid mattresses.
So, no, I would not use an adjustable base with that metal grid or widely spaced design. This is a better designed base, it has a wooden deck as its base, no slats.
1 Like
Got it.
I don’t see a Yawnder4 vertically split King option. I’ll go googling some more…
Thank you!
1 Like
Thank you again. I would prefer the wood deck enough to forgo the split in the King. I re-read marketing about the RIO on three different websites including shop.ergomotion…none of them describe the difference in decking between mesh on the Quest and wood on the RIO. That’s a huge difference! Thank you for steering me in a good direction!
1 Like
My pleasure. Good luck with it.
1 Like
It does come in a split king. I will email you the information